Electronics Line 3208GLD Instrukcja Użytkownika Strona 28
- Strona / 51
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
28
ADDRESSES 128 – 131: SYSTEM PARAMETERS
These addresses offer a number of options for each sub-system. The keypad tones (beeps) and one-key
arming feature for each sub-system can be set at these addresses. Program only system 1 for
unpartitioned systems.
128 First Digit: Keypad Arming/Disarming Tones for System #1
Each sub-system’s keypads can be programmed to beep during arming, disarming and during
the entry delay. Select the keypad tones for system #1 from the table below.
First digit value:
Arm Beep Continuous on Entry Disarm Beep Value
No 0
No No 1 1
3 2
Yes No 3
No 4
1 No 1 5
3 6
Yes No 7
No 8
3 No 1 9
3 A
Yes No B
No C
Continuous No 1 D
3 E
Yes No F
Second Digit: Display, Power Trouble Tones and One Key Arming for System #1
The second digit of this address offers options for the display type of each sub-system’s
keypads and the tones sounded for power related trouble conditions. One-Key Arming allows
the user the capability to arm the system, using either the STAY or AWAY keys, without
needing to enter a user code. Select these options for system #1 from the table below.
Second digit value:
Display
Type
One Key
Arming
Beep for
AC Loss
Beep for
Low Battery
Value
No No 0
Disabled Yes 1
Yes No 2
Summarized Yes 3
No No 4
Enabled Yes 5
Yes No 6
Yes 7
No No 8
Disabled Yes 9
Yes No A
Detailed Yes B
No No C
Enabled Yes D
Yes No E
Yes F
129 Same as above for System #2
130 Same as above for System #3
131 Same as above for System #4
- SummitSummit 1
- 3208GLD3208GLD 1
- TABLE OF CONTENTS 3
- INTRODUCTION 3
- Publication Information 3
- CHAPTER ONE: OVERVIEW 4
- 1.1: Specifications 4
- 1.2: Zones 5
- 1.3: Telephone Dialer 6
- 1.4: Remote Programming 6
- 1.5: Other Features 7
- CHAPTER TWO: INSTALLATION 8
- 2.1: Parts and Options 8
- 2.2: Mounting the Keypad 8
- CONTROL PANEL 9
- 2.3: Wiring Diagram 10
- 2.4: Terminal Connections 11
- 2.5: Fuse Replacement 12
- 2.6: Turning on the System 12
- 2.7: Testing the System 12
- 3.1: General 13
- 3.2: Display and Controls 13
- 3.3: System Status Displays 14
- Zone Status Display 15
- System Status Display 15
- Direct Command Codes 15
- Command Codes 15
- 3.5: Arming/Disarming 16
- 3.6: User Codes 17
- 3.7: Emergency and Duress 17
- Programming User Codes 18
- 3.9: Event Log 19
- 3.10: System Partitioning 19
- 3.11: Tests 20
- 3.12: Additional Operations 20
- Bell Cancel 21
- Stop Communications 21
- Follow-me 21
- Late To Close 21
- Latch Key 22
- Zone Chime 22
- Access Control 22
- Set Relay 22
- CHAPTER FOUR: PROGRAMMING 23
- 4.1: General 23
- 4.2: Guide to Programming 23
- 4.3: Programming Procedure 23
- First digit blinking 24
- Group ID 24
- Parameter address 24
- 180 181 182 183 30
- APPENDIX A: TROUBLESHOOTING 45
- GLOSSARY 47
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Electronics Line 3208GLD
Systemy kontroli dostępu bezpieczeństwa Electronics Line Penta XL series Instrukcja Instalacji
(33 strony)
(33 strony)
Systemy kontroli dostępu bezpieczeństwa Electronics Line infinite prime Instrukcja Użytkownika
(32 strony)
(32 strony)
Roberts CR9900 manuels
Manuels d'utilisation et guides de l'utilisateur pour Réveils Roberts CR9900.
Nous fournissons des manuels en pdf 1 Roberts CR9900 à télécharger gratuitement par type de document : Spécifications
Komentarze do niniejszej Instrukcji